Garment Storage Cubicle
These units available in various sizes to suit the
capacities are designed for applications including
cleaning and storage of LAB COATS and STERILE SUITS.
The cleaning and filtration media is Class 100 grade
filtered air re-circulation through pre-filter and
HEPA filter by means of blower assembly.
The Coats / Suits to be cleaned or stored is hanged
inside the unit by means of an PVC hanger / separator.
The Blower unit is activated upon the closing of the
unit door. The Filtered air re-circulating within
the unit removes any floating particle from the suit
stored within the unit. The unit comes with door interlocking
of the blower assembly and the germicidal U. V. light.
These units are factory assembled and are made up
of S. S. 304 grade Stainless Steel material. These
units have smooth welded corners.
A direct driven statically and dynamically balanced
blower assembly with a volume control damper is used
for air circulation within the cabinet. Easy access
is provided to the blower compartment.
DISCHARGE FILTERS :
Discharge filters are generally HEPA filters certified
to achieve an filtration efficiency of not less than
99.97% and filtration accuracy of 0.3 microns. Hence
the discharge air complies with Class 100 U.S. Fed.
Std. 209 - E.
Pre-filters made from the fibre glass media to achieve
high filtration efficiency and filtration accuracy
of upto 5.0 microns. These are used to block major
particles from the air within the unit being sucked
by the blowers and passing it through the discharge
filters. Thus enhancing the life of discharge filters.
Low voltage touch control panel in the front of the
cabinet is used for the unit operation. The unit comes
with the switchgear for safe & trouble free operation.
A MINIHELIC gauge is used for static pressure measurement
across the HEPA filters and also to monitor the blower
» Hour meter to record operation time.
» Static pressure transmitter. ( 4 - 20 mA )
» Variable blower speed control device.
» Onsite validation.
Writing and execution of DQ, IQ and OQ carried out
by our factory trained engineers.